Design Tips:
General lighting design should provide: indirect lighting, supplementary direct lighting for examinations and treatment and higher illuminance for emergencies. This is done either by activating more luminaires or by switching on all the lamps in the luminaires.
Patient controlled general lighting should be dimmable so that patients will not be subjected to unreasonable glare.
High color temperature and color rendering index (5000K >85CRI) fluorescent lamps are recommended to allow medical staff to assess skin tone and pallor, eye tints, prominence of veins, etc.
Lighting systems that use lamps with special properties for treatment of various medical conditions (e.g. germicidal, UV, and plaster heat curing lamps) may be incorporated and will need to be controlled independently from the general lighting.
An adjustable and moveable task luminaire provides higher level illumination for: examinations and emergency surgical/trauma procedures.
Glare free illumination of display screens and life support systems must permit reading of labels, operation of the controls and reading patient charts.
Dedicated observation lighting enables patients and medical equipment to be monitored at night. In rooms where patients are monitored through windows, the level of lighting needs to be significantly lower in the room than in the observation area outside. The daylight entering the space needs to be controllable using appropriate window treatments.
NOTE: Health Resource Administration standards require windows in critical care patient rooms to allow patient to be aware of the outdoor environment. (not as a lighting component)