​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

DUALescent™ LED T8 CCT Selectable UL Type A+B Lamps - End of lamp DUALescent™ LED T8 CCT Selectable UL Type A+B Lamps - End of lamp
DUALescent™ LED T8 CCT Selectable UL Type A+B Lamps - Full lampDUALescent™ LED T8 CCT Selectable UL Type A+B Lamps - Full lamp
DUALescent™ LED T8 CCT Selectable UL Type A+B Lamps - CCT switchDUALescent™ LED T8 CCT Selectable UL Type A+B Lamps - CCT switch

​​DUALescent™ LED T8 CCT Selectable UL Type A+B Lamps​

DUALescent™ LED T8 CCT Selectable Lamps are offered in 4-foot 12 or 15W lamps with 5-CCT select capability, 3000/3500/4100/5000/6500K. These lamps are UL Type A+B therefore they will operate by being wired directly to line voltage, in either double-ended or single-ended configuration as well as select T8 instant start or programmed rapid start electronic ballasts.​​


Benefits and Features​ ​

  • Selectable CCT: 3000K/3500K/4100K/5000K/6500K

  • G13 base LED T8 for use with instant start and select programmed rapid start electronic T8 ballasts or direct wire to 120-277V

  • Can be used in Single-Ended (SE) and Double-Ended (DE) wiring configurations

  • Lamps operate on shunted and non-shunted lamp holders thereby reducing installation costs when wired in the double-ended configuration (recommended)

  • No polarity; can be installed in either direction for DE wiring

  • Operated as UL Type B, DUALescent can also be used to replace T12 lamps

  • Suitable for dry and damp locations — not for use where directly exposed to water

  • DLC listing allows for rebates in areas where applicable, saving on overall project cost

  • Optimized glass optics

  • Beam angle: 200°; Light emitting angle: 320°

  • CRI >80

  • No warm-up time, instant-on with full light output and stable lamp-to-lamp color

  • No UV emission

  • Energy savings up to 58%​​

Contractor Benefits of the DUALescent™ LED T8 CCT Selectable UL Type A+B Lamps​

CCT selectability enabled through switches located on the lamp aids in reduced inventory and greater job site flexibility. Flexible installation options, either as a Type A direct replacement on compatible ballasts or Type B direct wire to line voltage (SE/DE) to avoid incompatibility and ballast maintenance. Adjust brightness & achieve additional energy savings through 120V phase-cut dimming (Type B) or when paired with compatible 0-10V dimming ballast (Type A) with robust dimmer list.

Contact Sales for more Information

STAY UP TO DATE WITH LEDVANCE

Sign up to our newsletter to receive LEDVANCE product launches, company news and promotion and contest information straight to your inbox.