LEDlescent T8 Ballast-Free LampsLEDlescent T8 Ballast-Free Lamps
LEDlescent T8 Ballast-Free Lamps - 2', 3', 4'LEDlescent T8 Ballast-Free Lamps - 2', 3', 4'
LEDlescent Ballast Free LED T8LEDlescent Ballast Free LED T8

​LEDlescent T8 Ballast-Free Lamps - 2', 3', 4'​​

Install LEDlescent T8 lamps to eliminate the failure mode of a fluorescent ballast, lower maintenance costs, and reduce energy consumption.  Wired directly to line voltage, LEDlescent lamps have a safety mechanism to prevent shock hazard and electrical arching.  These lamps are DLC v5.1 rated to allow for even lower lifecycle cost where utility rebates are offered.

The new lower wattage addition to the LEDlescent T8 family provides full brightness (2200 lumens) in a 4ft lamp which has a higher LPW to maximize efficiency and energy savings.

​​Benefits and Features​

— Optimized glass optics available in 2ft, 3ft, 4ft, and 8ft lengths

— CCT: 3000K, 3500K, 4100K, 5000K

— Light emitting area: 340° (17W and 18W Nano Plastic, 320°)

— Installed directly on 120-277V

— Patented built-in safety circuit prevents current from flowing through the lamp when only one end is engaged in the socket thereby eliminating potential shock hazard

— No risk of electrical arcing between the lamp pins and the lamp holders

— For use with shunted and nonshunted sockets therefore no socket change is needed

— Double ended lamp is wired end-toend preventing non-passive failure of a fluorescent lamp should it be inadvertently installed in the fixture

— 17W Shatterproof Frosted Nano Plastic lamps do not break in the manner of glass LED or fluorescent lamps

​— ​​THD <20%, power factor >0.90

— G13 medium bi-pin base; 8ft has single-pin base

— Long life: 50,000 hour life (L70)

​— ​​5 year limited lamp warranty (24/7 operation)

— No warm-up time, instant-on with full light output and stable lamp to lamp color

— No UV emission

​— ​​Suitable for dry and damp locations (cannot come in direct contact with water)​

— Maximize energy savings with occupancy sensors

— Suitable for open and enclosed fixtures

​— Approved for use with tube guards​​

— Products with “G2” suffix and lamp item numbers from 41062 to 41065 are dimmable when installed on 120V with trailing edge dimmers

— These lamps tested and approved with LUTRON NTELV-300 dimmer

​— ​​NLB Trusted Warranty Program​​

Contact Sales for more Information


Sign up to our newsletter to receive LEDVANCE product launches, company news and promotion and contest information straight to your inbox.